济南华轩机械设备有限公司

济南登车桥的油泵断油如何处理？

Jinan before loading dock ramp pump cover, the pump housing shall pour a small amount of oil, and hand turn meshing teeth, the replacement of worn gear pump or pump bushings, wear slightly when the tablet will face grinding smooth.

2、济南登车桥轴套上的卸荷槽必须装在低压腔一侧，以消除齿轮啮合时产生有害的闭死容积，根据季节添加或更换符合济南登车桥要求牌号的机油至规定油面处。

Ramps Jinan unloading groove on the sleeve must be installed in the low pressure chamber side to eliminate harmful dead volume when closing gear, depending on the season to add or replace compliance with the requirements of Jinan Ramps brand of oil to oil at a predetermined .

Jinan Ramps remove the foreign body inside the tubing, tighten the bolt or nut joints, replacement of worn gear pump or pump bushings, wear light in flat end mill will be smooth.